Triol AK06 Line CP

Power supply, V

3×380 ± 15% / 3×480 (-15% … + 10%)

50% continuously with reduced output power

65% up to 500 ms (with a decrease of output power)

Input Frequency, Hz

±1 Hz for VSD with built-in passive filter

Rated output current, A

100 – 2000

Overcurrent characteristics

120% of rated value for 60 sec

Change of frequency task increment

0,1 Hz

Efficiency

96 %

Passive filter efficiency

>98 %

Level of current distortion in the input network THDi,%

<5% in the load range from 25%* to 100% * operation in the extended load range is optional when specified in the order

DC bus choke

Built-in

Sine filter

Built-in

Capacitor unit (for voltage sags)

Option, outdoor

Braking IGBT

Option, built-in

Braking resistor

Option, outdoor

Electrical power meter

Option, built-in

GPRS router

Option, built-in

PID mode

YES

HMI

UMKA03 controller with a 7-inch monochrome screen, push-button control

UMKA07 controller with LCD-TFT 7 inch display, push-button control (touch screen optional)

Integration of third-party controller

Output frequency

1.5 – 80 Hz, in induction motor control mode

1.5 – 200 Hz, in permanent magnet motor control mode

1.5 – 600 Hz, in high-speed PMM control mode

PWM frequency

up to 8 kHz depending on VSD type

Speed maintenance accuracy (static)

+/- 10% of rated speed in open-loop system

Control type

vector control in an open-loop system without speed feedback (for PMM)

scalar control: based on the characteristic voltage / frequency U / F (for induction motors)

Light alarm

“Work”, “Waiting”, “Stop”

Operator control voltage

Option:

10 V DC, +/- 2% current not more than 30 mA

24 V, 300 mA

110/220 V, 10A for connecting of third-party consumers

Number of AI

2 by default, optional extension +8

AI type

programmable 4..20 mA, 0..5 mA, 0..10 V (frequency reference / multifunction analog input)

Number of DIN

2 by default, optional extension +4 or more

DIN type

24 V, input resistance: 4 kOhm

Number of analog outputs

Option, 4 or more programmable 4..20 mA, 0..5 mA, 0..10 V

Number of Relay Outputs

Option, 8

Acceleration and deceleration rates

linear, from 0.1 Hz / s

program mode with adjustable time of reaching given frequency

Insulation

Galvanic isolation between power and user circuits

Insulation resistance

> 5 MOhm

Protection type

Overcurrent protection

Power switched temperature (IGBT)

Max. and min. voltage in the DC link

Communication port

Modbus

Physical interface

2-wire RS-485/232 for Modbus by default

Ethernet (optional) – for communication with ACS /automated control system/

wire RS-485/232 for Modbus – for communication with a surface downhole measuring system

Frame Transmission

Modbus RTU

up to 115200 bps

Enclosure protection

NEMA4, NEMA4X

Material of enclosure

carbon steel, stainless steel

Operating temperature

-20 ° С … + 60 ° С

Relative humidity

100 %

Cooling type

Type of cooling Air-to-air heat exchanger for cooling of power compartment, air forced to cool the winding elements of the power circuit